1 
Energy-solutions for a sustainable 
future 
 
      
 
Sources 
This file as pdf:  http://e.pc.cd/4NeotalK 
According ppt-Presentation: http://e.pc.cd/YJuotalK  
Appropriate technologies for a sustainable future. Link to all videos https://youtu.be/IGEXXv4zkAw  
Part 1 Energy, Water-cars, hydrogen-engines, space-energy, Kinetic power plant: https://youtu.be/IGEXXv4zkAw  
Part 2: more Details about HHO, Hydrogen, Water-Gas, LENR-Systems, Neutrino-Power 
https://youtu.be/YthLEIGeU1w   
Part 3 Solar-System, Solar-Dryer Biogas, Hydro-Power, Levitation etc: https://youtu.be/A-gxnAwYegU  
Links for the presentation: http://e.pc.cd/GNeotalK  
 
Sustainable gardening and agriculture 
www.alternative-technology.de/Advanced_agriculture_technologies.html 
As a free pdf: https://e1.pcloud.link/publink/show?code=XZDfxHZp6sSwzW9khYteGo1E0cgTjgrHNMX  
or short http://e.pc.cd/hFMotalK 
Video: https://youtu.be/0tHfc2-yPj4  
Power-Point: https://docs.google.com/presentation/d/1zl9fx-ZMfTVcRH4boOqSr-
N1Pz_sKUUpKFL2DGPUDNM/edit#slide=id.p1   
 
Appropriate technologies energy  
www.alternative-technology.de/Appropriate_technologies_energy.html ou https://bit.ly/37MujqN  
 
Spirituality 
Christina von Dreien, advanced impulses: www.alternative-technology.de/Christina_of_Dreien.html 
Gospel of Thomas: www.alternative-technology.de/Gospel_of_Thomas.html 
  

2 
More information about sustainable development:  
https://e1.pcloud.link/publink/show?code=kZHiokZ0pPSgpmYAABNMCoT6qecoHvdcf6X  
or http://e.pc.cd/DqjotalK  
 
Reading the text with voice? It's free and easy with Talkie. Mark text, right mouse button to read aloud. 
Chrome: Talkie https://chrome.google.com/webstore/detail/talkie-text-to-speech-
man/enfbcfmmdpdminapkflljhbfeejjhjjk  
Firefox: Talkie, CLiCk, Speak,  
Internet Explorer:WebSpeech 
Android: @Voice (copy / paste text)  
  
 
Content 
 
Introduction ........................................................................................................................................................................ 3 
Arguments for Solar ........................................................................................................................................................... 4 
Solar-Systems ..................................................................................................................................................................... 4 
Charge Controller ............................................................................................................................................................... 5 
Agrophotovoltaics............................................................................................................................................................... 5 
Inverters .............................................................................................................................................................................. 5 
Solar-thermal Systems ........................................................................................................................................................ 6 
Solar Distiller, Desalination-Plants 13.8.2019 .................................................................................................................... 7 
Water motors and the Aquaflex motor................................................................................................................................ 7 
The secret of additional energy in highly efficient HHO gas production ........................................................................... 7 
The Aqua-Flex water motor for mopeds and cars! 15.7.2019 ............................................................................................ 8 
Engine with 95 % water-fog, water-gas and 5% Petrol ...................................................................................................... 9 
 Hydrogen production with pulsed electrolysis is 30 times more efficient ......................................................................... 9 
Renewable Energy 2018 - Gamechanging Solution to Power Generation. ...................................................................... 10 
Water and petrol as propulsion (Theo Almeida Murphy), 28.6.2019 ............................................................................... 10 
electromagnetic field on fuel 15.7.2019 ........................................................................................................................... 11 
 Water instead of gasoline ................................................................................................................................................. 11 
The flow cell technology Nanoflowcell in the Quantino 48 Volt from Switzerland ........................................................ 11 
More Technologies ........................................................................................................................................................... 11 
GEET fuel reactor ............................................................................................................................................................. 12 
Fuel cell ............................................................................................................................................................................ 12 
Gravitation water vortex power plant ............................................................................................................................... 13 
Biogas ............................................................................................................................................................................... 13 
Solar-Cooker ..................................................................................................................................................................... 14 
Solar Dryer ....................................................................................................................................................................... 15 
Experiments with efficient battery charging 15.7.2019 .................................................................................................... 15 
Mega-Pulses to extend Battery life-time ........................................................................................................................... 15 
Redox-flow batteries (6.1.2019) ....................................................................................................................................... 15 
New battery with water and salt from Holland (6.1.2019) ............................................................................................... 16 
GREENROCK saltwater energy storage (13.6.2019) ....................................................................................................... 16 
Iron-nickel batteries, very interesting! .............................................................................................................................. 17 
More ways for energy-storage 12.8.2019 ......................................................................................................................... 17 
Generator with Battery-Backup ........................................................................................................................................ 18 
Hybrid-Systems ................................................................................................................................................................ 18 
New energy technologies .................................................................................................................................................. 18 
Kinetic Power Plant .......................................................................................................................................................... 19 
Easy practical evidence that magnets are able to release energy ...................................................................................... 20 
Running magnet-generator of Robert Adams ................................................................................................................... 22 
India: Paramahamsa Tewari overunity-generator ............................................................................................................. 23 
Working 5 KW Magnet-Generator of Infinity SAV ......................................................................................................... 23 
Resonance ram .................................................................................................................................................................. 25 
Hydraulic Energy Generators HEG .................................................................................................................................. 25 
Neutrino power ................................................................................................................................................................. 26 
Wind-Energy .................................................................................................................................................................... 27 
Adsorption chillers............................................................................................................................................................ 27 
More advanced technologies for a sustainable future ....................................................................................................... 28 
 HHO-Systems .............................................................................................................................................................. 28 
Stirling Motor ................................................................................................................................................................... 28 
Stelzer-Motor .................................................................................................................................................................... 29 
Liquid nitrogen engine ...................................................................................................................................................... 29 

3 
LENR-Technology, E-Cat-Technologie ........................................................................................................................... 29 
 Keppemotor ................................................................................................................................................................. 30 
Solid State Solutions ......................................................................................................................................................... 31 
Pendelum System of Veljko Milkovi 15.7.2019 ............................................................................................................... 31 
STV-G Generators from Gigathor by Dr. Wolf Weber 29.6.2019 ................................................................................... 31 
Anti-gravitation, Levitation 17.8.2019 ............................................................................................................................. 32 
Research work of Viktor Schauberger .............................................................................................................................. 32 
Incineration 9.8.2019 ........................................................................................................................................................ 33 
Dual fluid reactor 29.6.2019 ............................................................................................................................................. 33 
Thorium-based nuclear power generation 7.8.2019 .......................................................................................................... 33 
 The success story of the law for the expansion of renewable energies ............................................................................ 34 
Marketing and success ...................................................................................................................................................... 34 
More Links ....................................................................................................................................................................... 34 
Appendix for reflection ..................................................................................................................................................... 35 
Requirements for substitution energy sources (Source Book of Synergy, Ahmed Kammas) ........................................... 35 
More Topics and people for research work 12.8.2019...................................................................................................... 35 
 
 
  
Before many generations pass, our machines are powered by a force that is 
available throughout our universe. (...) Energy is everywhere in space. (...) if 
this energy is kinetic - AND WE KNOW THIS CERTAINLY - then it is only a 
matter of time that mankind successfully connects its energy technology to the 
actual natural wheels. Nikola Tesla, Lecture on May 20, 1891 in New York;  
And he proved that this sentence is correct! Maybe it is time now for human to 
connect to the “natural energy wheels” to free human?  
 
 
 
 
Introduction 
There's good news! On July 5, 2019 an official presentation of the magnetic generator took place in Belluno, 
Italy, which was working for more than 6 hours and produced 7.5 KW (180 kWh daily) of energy based on 
the vacuum or space energy of the universe. This is the beginning of a new energy-Age.  
Links: Muammer Yildiz Magnet Motor - 72h Live Stream Demonstration "Italy" 
www.youtube.com/watch?v=3yf6GyamSKw=3yf6GyamSKw and YILDIZ Motor Test Livestream: 
www.youtube.com/watch?v=3yf6GyamSKw=ikP6n0YYG-A 
The photons of the sun go through the vacuum of the universe and provide light, heat and energy, but 
unfortunately not always! Are there "particles" that always provide energy? Probably yes and probably it is 
the neutrinos! This "space energy" can be used in different ways, some methods are easier, some more 
difficult.  
Recently there was a conference on new technologies and there were great presentations. In summary, we 
don't really have any energy problems. The source of many new technologies seems to be the energy of the 
cosmos, which can be used through the interaction of neutrinos. Nicola Tesla has described this as the 
original mechanism of nature from which we all feed at some point.  
- Researchers have succeeded in developing a film that produces energy. This is probably due to the 
interaction with neutrinos. This means that energy of a relevant magnitude would always be available at any 
place on earth without moving parts. Graphene and silicon are evaporated onto an aluminium foil. The 
system delivers a certain amount of power. Computationally, 1 m3 size can deliver a constant 4 KW. 
- By fine water evaporation (water gas) and enrichment with some gasoline an engine can be operated, 
which needs less gasoline and produces less pollutants. In this regard, the GEET cell by Paul Pantone, HHO 
gas, Brown gas, Stanley Meyer, Walter Jenkins etc. should be mentioned.  
- Through highly pulsed electrolysis hydrogen can be produced with extremely little power. The energy of 
the hydrogen is considerably higher! This can work because heat energy is taken from the environment (the 
temperature dropped immediately to °C!), an endothermic reaction. This gives you a very interesting fuel 
(hydrogen with fuel cell), cold energy and oxygen, no environmental pollution.  
- By special arrangement of magnets and coils which inhibit or amplify the magnetic force, a magnet 
generator can be built, which can deliver 5 KW in 1 m3 size continuously. Muammar Yildiz from Turkey 
and InfinitySAV have models ready for production.  

- The LENR technology, E-Cat of Andrea Rossi (cold fusion) generates heat that can be used to generate

energy. It is in the final stage!

- There are various motor constructions that can also tap the free energy or gravitational energy (e.g.

gravitational vacuum generator from GigaThor S.A.) etc.

- Dr. V. V. Marukhin from Russia has developed a revolutionary energy system whose efficiency is

unrivalled worldwide. The system of the Hydraulic Energy Generator HEG is based on a permanent

hydraulic-pneumatic vibration process. This system is also ready for production.

Theoretical considerations

If I look at the size of the sun and the Earth, if this solar energy is not enough, then something is wrong! In

fact, less than 10% of the Sahara's surface with solar energy is sufficient for the energy of the entire planet, a

fraction of it is enough for the complete energy for Europe. We have stable countries like Tunisia, Algeria,

Morocco and Egypt. So we would have limitless energy, storage with Redox-flow batteries etc., power to

gas-systems, low-loss energy transmission over long distances via HVDC, all proven existing technologies.

With this reliable and inexpensive solar energy (from the desert etc.), how they can still want to do fracking

and ruin valuable humus? How they can cultivate organic fuel and block and ruin good agricultural land,

because it is mono-culture! That destroys our mother earth sustainable!

A Spiritual approach

- Many people in the world pretend that God (who has many names) created the world with all species and

nature in an amazing way based on a genius plan far beyond human imagination and limitation. But

somehow he forgets about the energy! Really? #-We get Photons from the sun, which cross the vacuum of

the space, invisible in space. When they touch the Earth they release their energy and ensure life and

electrical power (Solar-cell). And there shouldn't be no another wave, which is doing that also in the night?

Why God didn't create that? What about the Neutrino, available everywhere at all times and able to deliver

energy (see below)? The beginning of a new Era?

Energy is one of the most crucial topics



 Many conflicts or war are only because of energy.7 million people

die annually from polluted air due to energy-conversion .

 A lot o trees are used for energy-generation and cooking with

dramatic consequences.

 The climate change can be reduced.

 Subsequent mass-extinction of species and environmental problems

can be reduced.

 Desalination of sea water could supply enough water.

 By vertical agriculture (many layers ) with artificial illumination a

multiple output of food is possible.

 Energy is expensive for poor people. If it is free they have more

money for other purposes.

 With free energy all this above will improve.

 Free energy could generate free people and solve a lot of problems.

Arguments for Solar

-Since 1970, solar energy has improved its cost position compared to oil by a factor of 5,355.

-The combination of solar and electric cars is 400 times more area-efficient than the combination of oil and

combustion engines.

-Solar energy is a decentralized resource. It can load electric cars locally without expensive and inefficient

pipelines, rails, cargo ships, refineries, storage facilities and gas stations.

-Solar energy is already cheaper than diesel to generate electricity.

-Solar energy is already cheaper than kerosene to provide heat and light.

-Solar energy is already cheaper than oil to desalinate seawater.

-In small projects, solar energy with battery storage is already cheaper than diesel to provide energy

continuously.

-In large projects, solar energy with specific storage is already cheaper than oil in order to provide energy.

Source: Book of Tony Seba, Clean Revolution

Desertec

https://www.dlr.de/dlr/desktopdefault.aspx/tabid-10200

The transmission energy is possible by high voltage DC-Transmission. Or by Power to gas-conversion.

The say the countries are to instable to implement it, but is that true?

Solar-Systems

Mono/Poly/amorphous-Type: amorphous-Type is

cheapest but look for Guarantee. Amorphous-Type

Solar-cell has more Power at cloudy days. Solar cells

should have at least 5 cm distance to the roof for

cooling. Grounding is not necessary. Solar-Cells

should be mounted in a way that no partial

shadowing will occur (by a tree or a Tree-leaf etc).

Outdoor you must use UV-resistant cable. Take care,

Solar-cells might easily be stolen! Cleaning of the surface is not necessary, this will be done by the rain, if

the Solar-cells are mounted a little bit sloping. Should have at least 15° ankle for self-cleaning. But really

self-cleaning happens only if it is sloping more than 40°. Otherwise clean it regularly (2-3 month). Ideal is a

ankle which is the same like the latitude in °.

Frames can be readjusted two times a year in order to improve Performance up to 25%.

From a 100W Module you get 360 Wh per day in Germany; 100 W approx. 350-450 Euro

www.sat-solar.ch

Charge Controller

Is necessary for not to overcharge and Deep-discharge Batteries. That reduces lifetime of the Batteries

drastically. So it should have deep-discharge Protection for the Battery.

MPP-Charger is suitable only for big-size Plants. Should have a cycle charge to a higher voltage (f.e.14,4

Volts) against Sedimentation. Some charge-Controller has a Interface for Data-Logging.

Agrophotovoltaics

The advantages of combining open space systems with

agricultural production. The photovoltaic panels, mounted at

least 5 m above the ground, allow soil cultivation and

harvesting using conventional agricultural

machinery.Numerous plants such as potatoes, hops or lettuce

thrive even better under photovoltaic systems than in the

blazing sun; other varieties such as barley, rapeseed or

cabbage can hardly be influenced by the moderate shade.

In China, Italy and Germany this is already practised as "Food

and Energy". http://www.agrophotovoltaik.de/english/agrophotovoltaics/

Inverters

Transforms 12V / 24V from Batteries to AC 110 V / 230 V.

 Install the inverter as close as possible to the battery.

 Do never reverse connect the positive and negative pole of the battery to the device.

 Install in a well ventilated, cool and dry places. Never install the unit in sealed battery boxes together

with lead-acid batteries because these batteries can produce dangerous explosive hydrogen gas that

could explode by a spark. Keep the machine away from flammable substances such as gases and also

of the reach of children

 The 230V AC output must never be connected with other active 230V AC power sources, because

this will destroy the inverter inevitably.

Sinus-Inverter is more expensive, but do not generate noise in the radio or TV and are suitable for all

Devices. You need Sinus-Wave for Copy-Machines, Drilling-Machines with variable Speed, Video, FAX

and Radio.

Modified sinus are more cheap and suitable for fridges, washing-machine, light, that means most Devices

except those with Power-regulation.

Modified Sine Wave Inverter has a higher efficiency (90-95%) as a pure sine wave inverter (85%) and are

cheaper (about 30%).

But equipment with speed control (eg vacuum cleaners, dimmers, washing machine, heating pump, gap

motors and microwave) have problems with non-sinus-inverters (often referred to as "modified sine wave").

Motors get warm (fan etc.) and energy saving light bulbs burn out sometimes.

Radio and television produces a noise. Sometimes a coil or filter can help (f.e. for a copier).

For bigger Units there should be an automatic-Switch-on Device for not losing too much energy in Standby.

Keep in mind that Fridges and Pumps need much more Power when starting than during running. So Inverter

must have a good Surge-Power (short time deliver 50% or more additional Power).

- Twist Battery cables if they generate interference.

- Connect Cable at the inverter first, then at the battery.

- Automatic Switch on/off is very useful. But there is a problem with long cables (> 30m) and very low

current rates (phone charger)

- Inverters may not be connected in parallel at the output! They get destroyed!

- Neither phase nor neutral may be connected to the earth! But connect earth potential with inverter earth if

possible.

- Should have a good EMC radio interference protection

Quality criteria for a Inverter

- High efficiency, even at partial load

- Low standby losses

- High overload capacity

- Automatic switch on/off and automatic load detection.

- Stable output voltage and frequency

- output short-circuit ability

- Status indication

- Good noise suppression

Because of negative effect of the ripple-current, there should be a big capacitor of (100 mF capacitor for a

2000 W Inverter) parallel to the Inverter-cables +/-.

Solar-thermal Systems Could be produced by small workshops. Very reliable!

The Water could be used for shower, washing the body, cleaning, cooking,

making tea and washing. Also the hot water is potable, due to

pasteurization-effect, but does not taste that well if it stays long on this high

temperature.

It works even if there is no direct sun.

Different Outtakes from the Tank for different Temperature-Levels are

possible.

You have a Hot-Water-Buffer in case there is no more water available.

At full sun the water can boil and get steam! The System must be protected

against that.

Most Systems do not need an extra Pump, they circulate by gravitation.

Vacuum-Collectors are more efficient, especially in the cold season.

But they are more expensive. They are loosing the Vacuum sometimes after some time.

But

 Hot-water will be ready at noon or afternoon.

 If the pipes are longer it takes some time of hot water to come.

 If there is no thermal Regulation-valve, there is a risk of injury due to hot water.

 For Laundry an external Temperature-Regulation is needed to setup the right Temperature.

Links

http://www.thesietch.org/projects/solarthermalpanel/index.htm

http://www.alternative-technology.de/Solar-Thermal-Systems/solar-thermal-systems.html

and there see the document “Sizing of a Solar-System” for a calculation.

Solar Distiller, Desalination-Plants 13.8.2019

PV Electrodialysis

Electrodialysis (ED) is used to transport salt ions from one solution through ion-exchange membranes to

another solution under the influence of an applied electric potential difference. The cell consists of a feed

(dilute) compartment and a concentrate (brine) compartment formed by an anion exchange membrane and a

cation exchange membrane placed between two electrodes. Multiple electrodialysis cells are arranged in a

stack.

Links

www.i4at.org/surv/sstill.htm

https://www.researchgate.net/publication/263599891_Solar_Desalination

https://en.wikipedia.org/wiki/Electrodialysis

https://www.usbr.gov/research/dwpr/reportpdfs/report191.pdf

https://tatacenter.mit.edu/portfolio/solar-powered-village-scale-electrodialysis-water-desalination/

https://tatacenter.mit.edu/wp-content/uploads/2018/11/Natasha-Wright-poster-1.pdf

Water motors and the Aquaflex motor

The secret of additional energy in highly efficient HHO gas production

HHO cells can be constructed as wet cells and dry cells; Hydrogen is produced from water. Each dry cell has

a water inlet (bottom) and a gas outlet (top). Water is separated in H + O2 by the current supplied by the

alternator and the resulting gas is mixed in the intake tract of the engine for combustion. With hydrogen as a

fuel gas, the efficiency of a gasoline engine improves.

Stanley Mayer patented a water car in 1992 (US patent no. 5,149,407). He managed to separate the water

molecules with low energy (with car battery) via pulsed high-voltage electrolysis and run a car with 100%

hydrogen. His invention could, for example, be used for home heating, power generation or for driving cars

and airplanes. Hydrogen provides 2.5 times as much energy as petrol and is therefore well suited for aircraft

engines. Stanley Mayer died unexpectedly on 20 March 1998 and is believed to have been murdered.

Links:

self-made-HHO-generator: https://www.youtube.com/watch?v=cqjn3mup1So

No petrol only water: https://www.youtube.com/watch?v=bRatjlvFyQQ

Home made hydrogen generator HHO: https://www.youtube.com/watch?v=twzUACFTC4k

https://carboncleansystems.com/

Walter Jenkins developed a process to run electricity generators of up to 20 hp (14.9 kW) from 5% petrol

and 95% water. He only needs 5 W for that! His method is not based on classical electrolysis, but on an

alternative way to capture the total potential energy of the fuel in the water. He can operate his car, even with

100% fresh or sea water. He discovered the key to his new energy technology while researching

thunderstorms and lightning. It was about that. To gain energy from charged particles in high-energy states.

Jenkins uses magnetic and electric fields with a certain frequency to excite the nebulised liquid particles of 1-

5 micrometres. It uses high plasma spark plugs. The fuel mist is not only ignited at the beginning of a

cylinder cycle, but is also exposed to an extended ignition spark while the piston moves downwards. The

ignition spark is pulsed several times. The H2O process technology drastically reduces fuel costs and

increases performance, and carbon and other toxic emissions are almost completely eliminated.

This makes it possible to operate both stationary units and road vehicles, with a range 4 to 5 times greater

than that of gasoline cars. It also works with bioethanol water. With its patented H2-Global process, every

combustion engine runs cleanly on water-based energy.

Prof. Philip M. Kanareav from Krasnodar showed on the basis of his theoretical model and practical

laboratory experiments in the video that it is possible to split water into oxygen and hydrogen, which

requires only about one tenth of the energy required by conventional electrolysers.

(www.borderlands.de/Links/Wassermotor.pdf).

More information

www.borderlands.de/net_pdf/NET0918S22.pdf or Moray King or see Ohmasa Gas.

https://www.youtube.com/watch?v=-JQtT5Be8wU

Water Fuel H2 Global by Walt Jenkins Energy Science and Technology Conference 2017

https://www.youtube.com/watch?v=kc1i0XG5kDE

https://carboncleansystems.com/

Walter Jenkins is looking for investors: h2ge@protonmail.com

www.borderlands.de/Links/H2G-Process.pdf

http://emediapress.com/tag/h2-global/

https://www.theothersideofmidnight.com/20180916_jenkins_king/

https://www.amazon.com/WATERENERGY-Cavitating-Electrolyzers-ZeroPoint-ebook/dp/B078RYBJMY

https://www.amazon.com/Shape-PowerDan-Davidson/dp/0962632155

The Aqua-Flex water motor for mopeds and cars! 15.7.2019

The procedures proposed by the inventor to be able to use water in larger percentages require some

additional measures, such as increasing compression, and to be able to process certain fuel mixtures better.

Or he suggests the installation of a system to irradiate the fuel with UV light before it is fed into the injection

system. Or he recommends a water de-molecularizer or ozonator, with which water can be broken down into

hydrogen and oxygen molecules shortly before injection.

Jose Vaesken Guillen drove 450 km with water by a converted motorcycle in Paraguay. The consumption

was 8 litres of water. The conversion cost 110 Euros! It seems to work similar like the GEET cell from Paul

Pantone. He recommends increase of compression, UV-radiation treatment of the fuel and a ozonator.

When a fuel is exposed to an electromagnetic field, the molecular chains break up and rearrange. This can

lead to an increase in efficiency.

Spanish book: aqua-flex: sistema de ahorro y combustibles alternativos

www.youtube.com/watch?v=2MNXN-RkWYA&feature=youtu.be

People and Technologies woring on that topics: Paul Pantone, Stanley Meyer, Walter Jenkins, Daniel

Dinge, Uli Schuhmacher, Dr. Theo Almeida-Murphy, Eduard Haas, Andrija Puharich , Carl Stella, Magnegas

von Ruggero Santilli, Hydrinos von Randell Mills, Ohmasa Gas von Omasa, GEET cell , HHO gas, Brown

gas, Moe-Joe-Cell

Engine with 95 % water-fog, water-gas and 5% Petrol

Mixture: up to 95 % water, 5 % petrol. Water-gas can be produced with a humidifier (piezo oscillator for oils

etc, ultrasonic nebuliser at Amazon or Ebay). This makes it very easy to convert an engine. The intake duct

must be reduced in size and direct injection takes place there. A piezo nebuliser can provide the necessary

nebulisation. Try with a small (motorcycle) engine first. Dr. Theo Almeida-Murphy was driving 450 km with

his car with that design!

Hydrogen production with pulsed electrolysis is 30 times more efficient

Hydrogen production:

 Chemical: e.g. acid + metal

 Catalytic: e.g. molybdenum preparations

 Bateriell: Procedure Penn State University (USA)

 Hydrocarbons Reforming (thermal)

 Electrolytic: with current

 Electrolytic: with high-frequency voltage: very efficient!

Prof. Murphy has split hydrogen with special electronics and found that he needs minimal energy for it.

There is an energy gain that exceeds the power consumption (overunity). Where does the energy come from?

It comes from the ambient heat, because with this conversion the ambient temperature has cooled down very

quickly from 22 °C to 0 °C, i.e. this is an endothermic reaction. Heat from the environment is used. This also

allows cooling (energy-intensive process) and energy (hydrogen) to be produced. In winter at 0 °C this

process will probably be difficult.

The electrolyte added to demineralized water was sodium hydroxide (NaOH) in a concentration of 4 grams /

liter, which corresponded to a conductivity of 17.53 mS/cm.

With DC current 18 watts of power was required for the electrolysis. The setup with a pulsed current of 200

nanoseconds pulse duration and a frequency of 100 MHz needs only 0.57 watts, i.e. only about 1/32!

Pulse operation requires an energy quantity of around 2.7 kilowatt hours to produce 1 kg of hydrogen.

However, 1 kg of hydrogen contains 33.3 kWh of energy. This means that about 12 times as much energy is

produced as Input-Energy! It supplied a quantity of hydrogen of 0.58 milliliters / second.

www.ijee.ieefoundation.org/vol3/issue1/IJEE_13_v3n1.pdf

10 
 
System of the company H2 Innovation-Lab: hydrogen is produced "on demand". This produces more than 1 
kg of hydrogen from 1 cubic metre of water in one hour. It is also possible with rain, sea or river water. An 
external power supply is not needed. They say it is 20 times more efficient than conventional processes by 
using new ?hydrogen burners?. Conventional electrolysis runs with an efficiency of 60%, this new process 
has an efficiency of over 2000 %! It is patented worldwide and is ready for production!  
 
Energy balance   
Approx. 2 L water per hour resulted in 2.5 m3 H2 
Electrical energy: 5A x 24 V = 120 Watt in 1 hour: 0,12 KWh 
For 2.5 m3 H2, approx. 12.5 KWh are required. 
12.5 / 0.12 = 104 less energy was used 
H2 at room temperature and pressure 1 bar: 3 kWh / m3 
Energy yield: Output / Input: 7.5 / 0.12 = 62.5 (Overunity!)  
 
Links  
www.h2innovativelab.com 
Hydrogen Generation Efficiency Test 1 - 2018: https://www.youtube.com/watch?v=0YQbIIXGVO0  
The Race To Unlimited Energy: Nuclear Fusion vs H2IL Hydrogen Power - 2018 
 https://www.youtube.com/watch?time_continue=5&v=QRR2Kc_cHk0 
Renewable Energy 2018 - Gamechanging Solution to Power Generation. 
https://www.youtube.com/watch?v=5CLa6Z9Kn4c 
Hydrogen Energy for the Automotive and Transportation Sector 
https://www.youtube.com/watch?time_continue=53&v=GL8UAuLrako  
Too Good To Be True OR Supported by Modern Science? 
https://www.youtube.com/watch?v=Wi7Xzi9aVXo  
Running a Generator on Water  http://www.free-energy-info.com/SChapter17.pdf 
Converting Water into Gas http://www.free-energy-info.com/SChapter15.pdf 
HHO Boosters http://www.free-energy-info.com/SChapter22.pdf 
Electrolyser Design  http://www.free-energy-info.tuks.nl/D9.pdf  
 
Water and petrol as propulsion (Theo Almeida Murphy), 28.6.2019 
Prof. Murphy has split hydrogen with special electronics and found that he needs minimal energy for it. 
There is an energy gain that exceeds the power consumption (overunity). Where does the energy come from? 
It comes from the ambient heat, because with this conversion the ambient temperature has cooled down very 
quickly from 22 °C to 0 °C, i.e. this is an endothermic reaction. Heat from the environment is used. This also 
allows cooling (energy-intensive process) and energy (hydrogen) to be produced. In winter at 0 °C this 
process will probably be difficult.  
Professor Dr. Theo Almeida Murphy showed how easy it is to switch an engine to water operation. Water-
gas mixed with gasoline or ethanol is also interesting as propulsion energy. Water gas can be produced with 

a humidifier (piezo oscillator for oils etc) which is available at Amazon, Ebay. This makes it very easy to

convert an engine.

- The intake duct must be reduced in size, and direct injection takes place there.

- A piezo nebuliser (Ebay!) can provide the necessary nebulisation.

The HHO cell saves 30-50 % in passenger cars.

The Moe-Joe cell is charged once (clocked) and then retains its effect.

96 % water and 5 % petrol is possible.

Information about Walt Jenkins: www.rexresearch.com/jenkinwaterfuel/jenkins.html

Water Fuel H2 Global by Walt Jenkins Energy Science and Technology Conference 2017

https://www.youtube.com/watch?v=kc1i0XG5kDE

Page with videos and documents: https://www.h2ge.com/

Take a closer look at the video "Engine runs on 99% water" and "Dune buggy runs".

https://onedrive.live.com/View.aspx?resid=B376831014F03FE7!2256&authkey=!AC4nS4EECeSZHVE

Thus you produce a fog (no gas). In addition, there are petrol vapors. The petrol vapors should come

separately, e.g. via an evaporator (intake air that bubbles through a petrol tank is sufficient).

Mr. Jenkins has also adapted the ignition coil.

More Links:

Thank you Stanley Meyer to sacrifice your life for mankind! We will never forget you!

https://www.youtube.com/watch?v=C3FQhf8X9OY why he died?

https://www.youtube.com/watch?v=C_YHiZZpKKk explanation why he died

removed! http://alexanderhiggins.com/water-powered-automobiles-inventors-killed-intimidated-and-bought-

off-to-keepclean-energy-from-public/

GEET fuel reactor

The GEET plasma reactor according to Paul Pantone is a technique for mixing fuel with water to increase

engine efficiency. The fuel savings should be between 10% and 50%. He stated that the reactor even worked

with highly diluted fuels, for example a mixture of 20% waste oil.

The basic design of a GEET fuel reactor consists of a heat exchanger A) (shown here as the reactor) with

which a large part of the exhaust heat is transferred to the intake fuel B). Temperatures of over 400°C are

measured inside the reactor. The sucked fuel is additionally exposed to a strong negative pressure. This

causes evaporation and the heavy long-chain hydrocarbon molecules are split into smaller molecules. A gas

is formed C). The higher the vacuum and temperature, the faster the process is accelerated. The gas produced

is mixed with air and fed to the engine via the existing carburetor.

The GEET fuel reactor is designed as an attachment so that the existing Otto engine does not have to be

changed. Only the transition to the fuel inlet and exhaust outlet at the engine block must be adapted

accordingly.

Link: http://www.clean-motor.com/

Fuel cell

A fuel cell is a galvanic cell that converts the

chemical reaction energy of a continuously supplied fuel and an oxidizing agent into electrical energy.

Depending on the type of fuel cell, methanol, butane or natural gas can also be used in addition to hydrogen.

It can produce hydrogen and oxygen from (solar) electricity and, conversely, produce electricity from

hydrogen or other media.

Especially in Japan, buildings are supplied with heat and electricity from fuel cells (micro cogeneration).

Unlike an internal combustion engine, the fuel cell converts chemical energy directly into electrical energy

and is not subject to the poor efficiency of internal combustion engines.

https://en.wikipedia.org/wiki/Fuel_cell

www.horizonfuelcell.com/

www.horizonfuelcell.com/h-series-stacks

14 
Gravitation water vortex power plant  
http://www.zotloeterer.com 
https://www.youtube.com/watch?v=oo_mP18IXMo 
 
Biogas  Biogas typically refers to 
a gas produced by the 
biological breakdown of 
organic matter in the 
absence of oxygen. 
Works good in 
Tropical/Sub-Tropical 
Countries. (needs 20-
30°). Provided with 
Human and Animal-
Dung and Urine, Plants, 
agricultural Waste and 
Water. Dry Substance 
max 10%. The dung of a 
cow could produce after 
14 days approx. 2,8 KWh 
Energy (same with 10 
Pigs or 100 chicken). 
Could be build with local 
material. But they also 
need additional water!  
Gas could also be used for light, cooking, heating, and Energy (Gas-Motor, but needs cleaning before), even 
for gas-cars. Biogas lamps from China and Brazil. Many System in India, Vietnam; If it is made in the right 
way, it has very little bad smell or smoke. The harvesting of biogas is an important role of waste 
management because methane is a greenhouse gas with a greater global warming potential than carbon 
dioxide.  
Good conditions are: according Humidity, air-locked (few air-exchange), no light, constant Temperature 
(min. 4°C; depending from Bacteria 25-40°C), pH-Value (depending from Type of Bacteria), additional food 
for Bacteria’s like Vitamins, Minerals.  
The biogas plant is part of a unit: the barn, the mixing tank, the plant, the sludge storage basin, the gas pipe 
and the gas utilization equipment 
 
 The calorific value is only about half the size of gas bottles 
 The digestion process requires a temperature between 20 ° C and 30 ° C. The higher the temperature, 
the faster the gas production and accordingly the shorter the digestion time 
 The container size is measured by the digestion time times of day filled Quantity. 
 The Dung must be fluid with about 8 -10 % of dry matter. In practice this means that fresh manure is 
mixed with approximately the same amount of water. 
 Thus, if the gas production is increased and decreased there is additional water demand: It is best to 
use the urine to reduce water demand.  
The digested sludge leaving the plant is in a liquid state and is best placed on the fields in this form. 
 If no special burners are available, commercial gas cooker can be used when the nozzle is opened a 
bit more. 
 The gas may also be used for illumination. 
 
Conditions for a Biogas-plant 
Continuous biological agent available 
Water is available 
There is a way to dispose the residual (on the fields etc) 
More Info: http://publications.lib.chalmers.se/records/fulltext/100663.pdf 
Design and Construction: http://www.ruralcostarica.com/biodigester.html 
http://www.aidg.org/biodigesters.htm 
http://www.i-sis.org.uk/BiogasChina.php 
http://en.wikipedia.org/wiki/Biogas 

https://energypedia.info/wiki/Electricity_Generation_from_Biogas

Ebook to buy: http://www.completebiogas.com/toc.html

Solar-Cooker Cooking the food only with the sun. Solar-Cookers have a lot of advantages:

Reducing the demand of fire-wood, no more smoke of fire which can lead to many

diseases, more free time for the children etc.

Although it is not that easy to implement the Solar-Cooker, may be because

cooking-habits must change a little bit. Solar cooking can be realized only with Sun

shine and in the day-time. But there are cookers with electrical Back-up. There must

be a good Training-System.

For example a rent and buy-System, with people who give Support in the beginning.

There are different types of Solar-Cookers:

Parabolic-Solar cooker: high Temperatures (up to 650°C), could also be used for frying in Oil. Cooking

times like the normal firewood-cooker.

Disadvantage: Not so easy to construct. Some material have to be imported. Only works with direct sunlight.

Has to be tracked all 30 min to the Sun-Position. Risk of over boiling. To keep food warm you also need a

Isolated Box. Only space for one Pot. Risk of damage of the eyes by concentrated sunlight (take sun-

glasses).

This disadvantages are not with the Box-Type Solar-Cooker: Can be built easily and cheap with local

material etc. The food can remain unattended, it does not get burned. The food stays hot in the Cooker for

some hours (close the Lid), even if there is no sun. Good price / performance-Ratio. Tracking the sun only

every 1-2 hours.

Disadvantage: Not usable for frying in Oil. Long cooking-hours (about double as with firewood). During

cooking not easy to access the Pot.

www.solarcooking.org

www.eg-solar.de: Parabol-Solar-Cookers with a good acceptance world-wide

Plans at www.med.uni-magdeburg.de/~maercker/SolCook/slcot-en.html

http://www.alternative-technology.de/Solar-Cooker/solar-cooker.html

Solar Dryer

 Dried foods are tasty, nutritious, the nutritional value and flavor of food is only minimally affected

by drying

 Dried foods are high in fiber and carbohydrates and low in fat, making them healthy food choices

 Vitamin A is retained during drying

 Storage space is minimal, easy-to-store

 Transportation costs are reduced; dried Products weigh only about 1/6 of the fresh food product

 The energy input is less than what is needed to freeze or can

 easy-to-prepare; solar food drying is a very simple skill

 longer storage of dried products (because of more complete drying)

 Can open new markets and income and is a good start-up technology. It improves the bargaining

position of farmers. Sometimes farmers sell at very low prices during the harvest season

 You can have up to 50% more productivity in agriculture

 For diabetics dried fruit prepared without adding sugar is a healthy choice instead of desserts.

 Dried fruit can be used in stews, soups and casseroles or enjoyed as snacks. It can also be added to

cereals for breakfast or used in making ice cream and baked products

Links:

http://www.alternative-technology.de/Solar_Dryer/solar_dryer.html

Experiments with efficient battery charging 15.7.2019

Pulse charging of batteries leads to more efficient charging.

The pulsed currents are conducted to the primary side of a transformer, with the secondary-side back EMF

pulses passing to the battery when switched off after rectification.

In addition to the transformer, an improved, more powerful circuit contains an ignition coil in parallel with

the transformer. http://www.borderlands.de/Links/Free_Energy_Multiplier.pdf

Mega-Pulses to extend Battery life-time

It has been known for many years that batteries, especially lead-acid batteries, can be "regenerated" again

after their storage capacity has declined. For this purpose, the battery is supplied with short, high voltage

pulses instead of the usual direct current. A typical device of this type that exists worldwide is the so-called

megapulser. This is permanently connected to a battery. The periodically generated voltage pulses prevent

the sulphation of batteries or rejuvenate them again by removing sulphate deposits.

Battery pulser for the regeneration and care of all Lead, GEL or AGM batteries. Treated with the Megapulse,

batteries damaged by sulphating can be fully recharged and even batteries that were believed to be dead can

be made ready for use again.

http://www.borderlands.de/Links/Free_Energy_Multiplier.pdf

http://www.borderlands.de/Links/On_Pulse_Charging_of_Lead_Acid_Batteries.pdf

Redox-flow batteries (6.1.2019)

The redox flow cell is a very good way of storing

energy over long periods of time, as it has no self-

discharge and no memory effect. It stores the energy

in liquids, so it has a very long service life, since no

structural changes take place on the electrodes. In

addition, large amounts of energy can be stored

relatively inexpensively, as only large tanks and

sufficient electrolyte solution are required.

Depending on its size and type, it can provide

outputs from a few 100 watts to several megawatts

and has efficiency in the range of 75 to 80 percent.

In addition, the system has low self-discharge and a

long service life. The energy density is

comparatively low; usually with the vanadium redox

accumulator on sulphate basis approx. 25 Wh per litre electrolyte liquid can be achieved, with the zinc

bromine accumulator approx. 50 -80 Wh per litre electrolyte liquid. Commercially available lead

accumulators achieve an energy density of around 42 Wh/kg, based on the total mass of the accumulator.

Compared to a pumped storage plant, however, the energy density is significantly higher.

https://en.wikipedia.org/wiki/Flow_battery

New battery with water and salt from Holland (6.1.2019)

17 
A team from Holland has developed a battery that only uses water and table salt for 
storage. It is intended to be an environmentally friendly alternative to the efficient 
storage of energy. Electrodialysis (ED) is used to supply electricity from solar or 
wind turbines to an ion-selective membrane, whereby mixed water is separated into 
salt water with a high ion content and normal fresh water. As soon as electrical 
energy from the aqua battery is required, the separated water flows are reunited in 
the mixed water tank via reverse electrodialysis (RED). 
The new battery does not contain any heavy metals that are harmful to the 
environment. Instead, the "Blue Battery" uses water and common salt to store 
energy. It consists of freshwater and saltwater tanks with separate water streams 
and a device that stores electricity in a special membrane or releases it again. A 
pilot project supplies several households with electricity day and night via the Blue 
Battery. It is ready for series production!  
 
Links: 
https://www.youtube.com/watch?v=lFnEajh6QvY 
https://www.youtube.com/watch?v=Fsc3VEqqdtk 
http://aquabattery.nl/ 
NET Journal Vol. 23, Issue No. 11/12 S 51 
 
GREENROCK saltwater energy storage (13.6.2019) 
 
GREENROCK’s battery technology is the safest and greenest electricity storage 
device in the market for storing electric power. Maintenance-free and reliable at 
the same time. Robust due to the possibility of a complete deep discharging of 
the battery. 
A wide temperature tolerance window allows additional flexibility for you as a 
customer. Even if it gets really hot, the GREENROCK power storage can neither 
burn nor explode. Consists of natural materials. 
From 5 KW to several hundred KW.  
https://www.bluesky-energy.eu/en/greenrock-saltwater-energy-storage/ 
 
 
 
 
 
 
Iron-nickel batteries, very interesting! 
 
 Very robust battery which is tolerant of abuse, (overcharge, over discharge, and short-circuiting) and 
can have very long life even if so treated. It can last for more than 20 years. 
 Harmless  
 No short circuit problem 
 No danger of fire or explosion 
 Very effective hydrogen-producer:  can be used as combined batteries 
and electrolysis for hydrogen production for fuel cell cars and storage 
 Environmentally friendly (do not have the lead or cadmium) 
 Very fast rechargeable! 
 Ability to withstand vibration, high temperatures and other physical stress 
 Good for  off-the-grid applications 
 They charge slowly, and are only able to discharge slowly 
 
Negative 
 High weight! 
 Low specific energy, 
 Poor charge retention 
 High cost of manufacture 
 

Links: https://en.wikipedia.org/wiki/Nickel%E2%80%93iron_battery

More ways for energy-storage 12.8.2019

http://www.buch-der-synergie.de/c_neu_html/c_10_00_inhalt_energiespeichern.htm (German)

This can convert waste water to energy!

Bamboo, coconut shells and the shells of the Durian fruit can be

transformed into an activated form of carbon. The activated carbon previously used could be replaced.

Generator with Battery-Backup

You can reduce running-time of the Generator by using a high-current charger and batteries and a Inverter.

The Generator has to be switched on, only if the Batteries are empty.

You can increase life-Time of the Generator: First start Generator, switch on Load 3 minutes after Start.

At the End switch of Load 3 minutes before you Stop the Generator for better cooling down.

Is there a representation for the Generator in the country?

Hybrid-Systems

Combination of a Solar-System and Generator. The Energy is 100% available. Cheaper solution than only

with Solar. But Generator need maintenance. If you have Micro-Solutions (every family has its own Solar

System), a mobile generator for about 10 households could be enough.

New energy technologies

Free-energy, space-energy, Vacuum-energy, Zero-point-energy, Neutrino-Power, many names for the same

energy?

Free Energy-book www.free-energy-info.tuks.nl/PJKbook.pdf a free ebook with many ideas and concepts!

Kinetic Power Plant

The power plant uses, among other things, the Archimedean principle and produces 24

hours of green, emission-free electricity without having to supply fossil fuels from

outside.The power plant types are scalable and are sold with

a power output of 200

kW or more

. Functionality: A complex controlled compressed air filling sets a

container system in permanent rotation. The buoyancy force is converted into kinetic

energy by a gearbox, which drives a generator that acts as a brake and converts the

braking energy into usable electricity.

The Kinetic power plant consists of



A paternoster with mounted swimming tanks (open on one side) in a plunge pool filled

with water.



A compressor that fills the tanks with air. Their buoyancy force sets the paternoster in

rotation.



A generator driven by the paternoster via a chain gear.



A compressor compresses air and blows it down into the buoyancy bodies

whose openings are at the

bottom (ascending side).



The water is displaced. The resulting buoyancy accelerates the

paternoster. The water resistance

increases with increasing speed in the

square.



For this reason, the rotation in the paternoster must be slowed down so

that the water resistance

remains low.



The electric motor counterforce of a generator is used for braking. This generates

electrical energy.



You do not need any fuel



Can be built decentralized (where electricity is needed)



emit no exhaust gases and no CO2, no waste



relieve the load on the power lines



Generate clean and ecological electricity 24 hours a day and 365 days a year.



12 kW at the output and only 1.7 kW power requirement for compressed air generation, i.e. a

COP of 7:1 ! This results in a COP (efficiency) of 7:1.

8 meters water depth.

Slow Speed: 5 cm / sec;

A kit for 5 KW costs about 15.000

€

A finished 5 KW power plant with rectifier and inverter 25.000

€

This system requires 50 x 50 cm floor space and 4.5 meters height.

A system with 200-300 KW costs 1 million

€

;

A system with 5-7 MW costs 20 million

€

;

Links:

Supplier Rosch Technik

https://rosch.ag/; info@rosch.ag

https://www.e-cat-deutschland.de/home.html;

info@e-cat-deutschland.de

https://www.e-cat-deutschland.de/download/KPP_Brochure_200K_engl.pdf

Animation Kinetic power plant (KPP) KI-tech.no: https://www.youtube.com/watch?v=FravXky8oYQ

Rosch thrust kinetic power plant (KPP) demo https://www.youtube.com/watch?v=03aVI1_OMsA

https://www.youtube.com/watch?v=8Zenn0VD2Bo

Rosch KPP 15 kW Free Energy System Demo June 20, 20

https://www.youtube.com/watch?v=7-5qd7bEiqA&list=PLe0xWOPe2ch2Z4iktEg8AVFMmJef-r2NA

Free energy for all people

Professor Claus W. Turtur

Prof. Dr. Claus Turtur calculated the room energy theoretically and proved it practically.

This is his model for the proof of space energy. The wings at the bottom rotate constantly.

http://oevr.at/docs/Raumenergievortrag%20Turtur%20beim%20Wirtschaftsgipfel%20Uni-Luzern.pdf

and many more videos on youtube and documents online search "Dr. Claus Turtur"

http://oevr.at/docs/Raumenergievortrag%20Turtur%20beim%20Wirtschaftsgipfel%20Uni-Luzern.pdf

To supply people with energy, one needs powerful space energy motors. The development of such a motor is

presented from the physical basics to the finished design sketch of Professor Claus W. Turtur. The machine

is about as big as a laser printer and delivers about half a kilowatt - without any environmental damage, free

of charge, harmless to health.

Size of a room energy converter for a detached house: 1.5 x 1.5 x 1 meter

Details and Background

Is the Energy-problem of mankind solvable? (part 1) www.youtube.com/watch?v=YeVQpK243ho

Is the Energy-problem of mankind solvable? (part 2) www.youtube.com/watch?v=qjdEOPhwLU8

Is the Energy-problem of mankind solvable? (part 3) www.youtube.com/watch?v=Dnz-Qjtz_I8

21 
Theory: 
https://web.archive.org/web/20170924045118/http://www.ostfalia.de/export/sites/default/de/pws/turtur/imag
es/1_Schrift_03f_englisch.pdf  
https://web.archive.org/web/20170704034125/http://www.ostfalia.de/export/sites/default/de/pws/turtur/imag
es/1_Series-english-5Articles.pdf  
https://web.archive.org/web/20170924042640/http://www.ostfalia.de/export/sites/default/de/pws/turtur/imag
es/2_Forschungplan_-_englisch.pdf  
Easy practical evidence that magnets are able to release energy 
Put one (Neodymium)-magnet on metal. Especially with Neodymium-magnets there is a lot of attraction-
power by that (amazing!).  Remove that (Neodymium)-magnet in the same direction. The same power is 
necessary to remove it! Energy-balance = 0! That means the same energy you get out by attraction you have 
to put in (maybe more) to separate them.  
 
Now remove the (Neodymium)-magnet now 90 ° to the right (or left) direction.  
  
Much less energy is necessary! That means you get more energy out (by attraction) than you need to put in to 
separate them. If you calculate all that energy to but the magnet back to original position, there will be a 
positive energy balance, that means you get energy out, there is an over unity-factor! Try it, with the fridge-
door? It seems that this effect takes place at the magnetic motor.  
 
- Crucial is the asymmetric construction. That means that more magnetic force is available in rotation-
direction and vice versa. With a symmetric design, no constant rotation or movement is possible 
(Bedini).  
- The active area (surface) of the magnet is crucial. Therefore bigger magnets can generate more 
torque.  
- Elliptical gear could be an option to generate an asymmetric situation.  
- It seems that Solide-State electronic constructions by Transformer and resonant circuit could work as 
well. In the free e-book www.free-energy-info.com/PJKbook.pdf  there is a lot about all.  
- One construction which worked of Robert Adams has long magnets only in the rotor and in the stator 
4 Energy-harvesting coils and 2 smaller control-coils. The time of the activation of the coils is 
crucial. (www.youtube.com/watch?v=J2bPDDWqSvM&pbjreload=10) 
- It seems that there are engines running exclusively by Neodymium-magnets, but the arrangement 
and position seems to be essential and not easy! The magnetic shielding seems to be mandatory in 
order to generate an unsymmetrical status (more power in rotation-direction and vice versa). Mike 
Brady made round shielding around the magnets.  Perendev-motor of Mike Brady: 
https://www.youtube.com/watch?v=hkjVqg8GZI0;  Pakistani Wasif Kahloon engine: 
www.youtube.com/watch?v=nYXIBTB4fao   
- This can be increased by mechanically move the magnets if they work opposite to rotation. Running 
Motor by FRIEDRICH LULING Theory:  https://www.youtube.com/watch?v=BmGx_XQTOHw, 
practical: https://www.youtube.com/watch?v=h2PupzLzjkI.  Or by mechanically rotate the magnets 
if they work opposite to rotation at the correct time to the correct position: Design by Thomas Engel 
2013 in German newspaper FAZ. Shortly after that he died.  
(http://blog.hasslberger.com/2013/11/german_inventor_solves_permane.html). The energy for the 
movement (8 mA at nine volts) is considerable less than the energy produced by that engine. But the 
maximal rotation speed is limited (Thomas Engel engine 400 RPM). Good explanation: 
hwww.youtube.com/watch?v=4Ge2h8Apgd8&app=desktop  
- Pulsed solenoid coils to reduce the unfavorable magnet forces (minus values!) at specific positions.  
- Pulsed solenoid coils which take the induced energy from certain positions and thus positively 
influence the magnetic field (it seems this principle is realized by Svobodian Andrey 
https://www.youtube.com/watch?v=hT1hNAIMk7U.  
- Pulsed solenoid coils that force specific magnets at specific times to saturation when they work 
opposite direction (requires more energy). 
- Another way is to make the construction in a way that the shield can be moved forward to decrease 
the magnetic-field  and backwards (90 ° to the magnet-field, to reduce the energy) to increase the 
magnetic-field.  

22 
- Using a motor to start and run the magnetic continuously and a generator (could be integrated in the 
magnetic motor) to tap the energy and provide the motor and over-unity. It seems that Infinity in 
South Korea is doing that. In that way the speed etc. can be regulated very well.  
 
 
Motor powered with neodymium magnets  
www.youtube.com/watch?v=mHW6b1aFPfU 
Free Energy Generator, Working Patent! Muammer Yildiz Magnet Motor, Detail design!!! 
www.youtube.com/watch?v=sk2s8fHSP9k 
Free Energy 1kW magnetic motor https://www.youtube.com/watch?v=cRkuFenWLgg 
Electromagnetic generator 10 kW Free energy device https://www.youtube.com/watch?v=Qrw6Xj5a0nM 
http://blog.hasslberger.com/2013/11/german_inventor_solves_permane.html 
 
More Proposals and Examples 
https://s3.us-east-2.amazonaws.com/lead-dmm/magnetmotor+model+neu+hamburg.mp4  
https://www.youtube.com/watch?v=VNmtFMuhDAY  
https://goo.gl/images/XSE9H2  
http://jnaudin.free.fr/html/mromag.htm  
https://goo.gl/images/8Ajhb5  
https://www.youtube.com/watch?v=eA0b-8pqUCk  
https://www.youtube.com/watch?time_continue=6&v=RkLfpXpO5sQ  
 
Spanish: prove ispirate al motore elettrostatico di Turtur www.youtube.com/watch?v=2VRDK5Ra-lg 
 
 
Running Magnetic-generator by FRIEDRICH LUELING  
 He mechanically moved some magnets back and forward and 
was able to run this machine continuously without additional energy.  
presented it on TV at UFA-Wochenschau 08.02.1966  https://www.youtube.com/watch?v=Y0T3JWEnSIE 
Theory:  https://www.youtube.com/watch?v=BmGx_XQTOHw,  
practical: https://www.youtube.com/watch?v=h2PupzLzjkI. 
 
Working magnetic-generator of Thomas Engel published 2013 in German newspaper FAZ.  
 
 Magnets are rotated at certain times. The energy for the movement (8 mA at 
nine volts) is considerable less than the energy produced by that engine. The maximal rotation speed was 400 
RPM. The function had been proved by the journalists of a leading German newspaper FAZ.  
Shortly after he published that article he died.   
Good explanation: www.youtube.com/watch?v=4Ge2h8Apgd8&app=desktop 
http://blog.hasslberger.com/2013/11/german_inventor_solves_permane.html. 
 

Running magnet-generator of Robert Adams

When he was 70 years old, Robert Adams of New Zealand designed a very effective magnet-

generator. He was told to destroy his device or he would be killed. Robert decided that at his age, he had

very little to lose and so he published his design. His generator achieves a power output which is eight times

greater than the input power.

www.free-energy-info.com/Adams.pdf

www.free-energy-info.com/PJKbook.pdf

https://www.youtube.com/watch?v=J2bPDDWqSvM&pbjreload=10

India: Paramahamsa Tewari overunity-generator

News from India: In India, the energy revolution is now beginning with

Paramahamsa Tewari - and: it is not hindered in India, rather

promoted!A lot of Details: http://rexresearch.com/tewari/tewari.htm

https://www.tewari.org/

INDIA PERMITS FREE ENERGY TECHNOLOGY DESPITE

THREATS FROM UK, US, SAUDI ARABIA:

https://wearechange.org/india-permits-free-energy-technology-despite-

threats-from-uk-us-saudi-arabia/

24 
Working 5 KW Magnet-Generator of Infinity SAV 
     
Dipl.-Ing. Andrij Slobodian has developed a 5 kW magnetic motor.
 
30,000 orders have been 
received.
 
The 5 kW magnetic motor costs 20,000 €.
 
That Infinity was blocked for a long time by a lawsuit. An investor gave the money to a wrong middleman 
and that blocked the project for years. Currently there is still a small thermal problem, which prevents an 
endurance run and then it is tested at Gaia in a 14 day endurance test, until a series production in Germany is 
to start. The Infinity generator has 72 round magnets with 30*30 mm. In Europe, it will be designed 
differently without a starter motor and with the coils outside in the stator.   
Feed-in should be possible via rectifier diodes and feed-in inverters. This would result in realistic payback 
times. 
 
Links: https://www.youtube.com/watch?v=hT1hNAIMk7U  
https://www.youtube.com/watch?v=EmdKVecQhXs  
https://www.youtube.com/watch?v=cRkuFenWLgg 
 
 
Magnetic Motors Muammer Yildiz 
The 7.5 KW magnet generator from Muammar Yildiz is equipped with 270 magnets and is mechanically 
much more sophisticated that the Infinity-Unit. 
In Belluno, Italy at the 5th of July, there was an official presentation (see links) of the magnet generator, 
running more than 6 hours producing 7.5 KW (180 kWH daily) 
Magnet Generator: Muammer Yildiz Magnet Motor - 72h Live Stream Demonstration "Italy" 
www.youtube.com/watch?v=3yf6GyamSKw und YILDIZ Motor Test Livestream: 
www.youtube.com/watch?v=ikP6n0YYG-A.  
http://www.borderlands.de/net_pdf/NET0510S21-26.pdf 
https://www.youtube.com/watch?v=el9krMCR-xk 
http://hmsbturk.com/tr/videolar/ 
https://www.youtube.com/watch?v=NRqjjiCoCOE 
 
 
Howard Johnson  Permanent-Magnet Motor 26.8.2019
 
 
In 1979 the American engineer Howard Johnson applied for and was granted the 
patent US4151431 for a permanent magnet motor. A prototype of the motor was 
presented in Science & Mechanics Magazine in 1980.  
DVD Howard Johnson's Permanent Magnet Motor Plans 
http://rexresearch.com/johnson/1johnson.htm
 
http://fuel-efficient-vehicles.org/energy-news/?page_id=1064 (mit Plänen)
 
https://www.youtube.com/watch?v=0t7gNv95oro 
 
https://www.youtube.com/watch?v=Db9s3u08YUM 
 
  
 
Working Energy-generator with up to 5 MW from Noca 

The DMIG is available starting at 5MW and is easily scalable to larger power requirements.

http://www.nce.energy/

The chef said that suddenly an important employee disappeared!?

The central question with regard to "free energy"

How to increase the cross section in neutrino absorption



vibration



rotation



layer materials



extremely strong fields (electrostatic/magnetic)



extremely asymmetric fields



high frequencies



very steep and very high pulses



and combinations of all that

And the magic ingredient: Runaway Breakdown / Electron Avalanche

https://en.wikipedia.org/wiki/Runaway_breakdown

Sources

Download a free ebook of free Energy with many ideas and concepts!

www.free-energy-info.tuks.nl/PJKbook.pdf

Resonance ram

Advantages

Resonance rams can be used in sea water as well as in lakes, ponds, rivers, and

in artificial water reservoirs.

No water supply is required as is the case with run-of-river or storage power plants.

Resonance rams can heat the pumped water to a higher temperature.

In a 500 kW plant, for example, water that is fed into a storage tank heats up in

20 m

depth from +15 degrees to up to +75 degrees,

They are used successfully for electricity production.

Until 2009, several resonance rams with outputs of 1000 kW were sold

in Europe.

Links

http://www.borderlands.de/Links/BeschreibungResonanzwidderAS051115.pdf

Russian : https://www.youtube.com/watch?v=O8P9gN15fuc

Hydraulic Energy Generators HEG

Dr. V. V. Marukhin,

has developed a revolutionary energy system whose

efficiency is unrivaled worldwide. The

system of the Hydraulic Energy Generator HEG is based on a

permanent hydraulic-pneumatic oscillation process

and is the logical further development of the well-

known hydraulic ram. This works automatically via an interplay

between fluid pressure and fluid

acceleration every second.

Dr. Marukhin says that in his systems the undamped lattice oscillation is caused by a direct coupling to the

atomic oscillation.

The 80 cm high tube generates an output of 1 MW

autonomously.

The length/height is 80 cm, the diameter 20 cm. The dynamic vibration energies are converted at 3,000

Hz via

piezoelectric foils at pressures of 2,500 bar.

The noise is practically inaudible (0.2 dB)

New development since 2009

The European patent granted on 30.1.2014 states a feasible output of 65 KW to 65 MW.

The plants licensed today have an output of between 20 kW and 1,500 kW, while the production costs are

low.

Reference:

Adolf.schneider@vtxmail.ch;

www.transaltec.ch

Neutrino power

Neutrinos are hardly detectable, but they could be carriers of free

energy. The Nobel Prize for this topic was

awarded in 2015. It's been taken seriously ever since.

Neutrino-Power, the energy production by conversion of invisible radiation

In the laboratory it is already possible to capture part of the kinetic energy in the radiation. For this purpose

the neutrinos are not captured, but a super symmetrically coated, crystalline substance is placed in their path.

It is located on a metallic conductor coated with doped particles of carbon and silicon (nanoparticle

derivatives). Doped graphene and silicon are applied to a carrier material in several alternating layers. The

coated side of the carrier then represents the plus pole, the uncoated side the minus pole.

The geometry of the coating is chosen so that the resulting vibrations are amplified by resonance. Part of the

energy of the particle stream is thus transferred to the electrical conductor and converted into electrical direct

current.

Skenderbeg Klaiqi presented a (sophisticated) film live that really produced energy for an LED (16 mW/cm)

when stacked.

On a normal sheet of paper, a permanent output of between 2.5 and 3.0 watts is available. With 1,5 sqm

theoretically 5 KW would be possible.

27 
Background: I
f you look at the lattice structure of graphene under an electron microscope, you can see that 
the effect is so strong because the material density is so high. There is a phonon coupling of 
molecules/atoms or an acceleration of electrons via coupling to nucleons, which in turn are excited via 
neutrinos.   
  
 
Links:
 
www.neutrino-wiki.com
 
https://neutrino-energy.com/
  
Neutrino energy, the inexhaustible energy source of the future! Holger Thorsten Schubart at the Intervi
 
https://www.youtube.com/watch?v=lY15D2zmxWI
  
Neutrinos - new energy source Part 2: https://www.youtube.com/watch?v=lohMQjB9l1o
 
NEUTRINO, the energy source of the future: https://www.youtube.com/watch?v=QQy-89t7foE
 
Salesman: Henry grey,stanley meyer,
 
Prof. Meyl: Free Neutrino Energy in the whole Universe: https://www.youtube.com/watch?v=bfcLjIlsLnQ    
Dr. Konstantin Meyl- Expanding Earth Theory and Neutrino Power 
 https://www.youtube.com/watch?v=5FDPXRoIE90  
Amazing graphene wallpaper could power your home from waste light or heat 
https://marketbusinessnews.com/amazing-graphene-wallpaper-could-power-your-home-from-waste-light-or-
heat/126550/ 
 
Produce neutrino energy foil yourself (28.6.2019) 
 
Buy Graphene and silicon in a good quality.  
Take as a carrier household aluminum foil.  
Apply layer, let dry, then next layer.  
Heat in the oven at 200 °C for 12 min. 
Do not inhale! 
At the end apply hairspray to seal. 
For testing shield against mobile phone radiation, go into deep cellars, shafts etc.. 
Further materials are applied to the metallic carrier in different procedures (evaporated, sprayed, glued) in 
different sequences. 
A foil made of aluminum or an aluminum alloy has cost advantages. A foil made of silver or a silver alloy 
achieves better values. 
Another advantage is if the film has a thickness of 0.05 mm - 1 mm. 
The coating may contain approx. 25% silicon. 
The coating can also preferably contain 75% graphene. 
Another advantage is, if the coating contains organic or inorganic adhesive components. 
Here the particles of silicon should have a size of 5nm and those of graphene 20nm, since the efficiency is 
increased the smaller the particles are. 
Advantageously, the coating alternately knows layers of silicon and graphs, in particular 12 silicon graphene 
layers. After 12 layers, the voltage decreases again. 
There is a patent on the above design that must be observed! 
Patent: https://patents.google.com/patent/WO2016142056A1/en 
https://patentimages.storage.googleapis.com/3a/63/91/a4171ae49c3b11/WO2016142056A1.pdf 
   
Youtube: Peter Lang Neutrino 
https://www.youtube.com/watch?v=4WLSq6eJjPs 
https://www.youtube.com/watch?v=xKhh6YRPl3A 
https://www.youtube.com/watch?v=B5k5eEtwB4I 
https://www.youtube.com/watch?v=_VPkpFfbV54 
https://www.youtube.com/watch?v=aehqhgO34QM 
https://www.youtube.com/watch?v=tm7jJ0TWRyc 
https://www.youtube.com/watch?v=khdIHNUIrDc 
https://www.youtube.com/watch?v=M_C0nX-Feqk 
https://www.youtube.com/watch?v=XfxiNxqU7PQ 
https://www.youtube.com/watch?v=FL7bqa0tKMw 
 

28 
Wind-Energy 
You have to check the situation of the wind in your area. In coastal areas you have a relatively stable wind.  
If you make it by yourself, you can also use a Generator from a car. They have an integrated regulator.  
Take care: Wind-Turbines have to be constructed and fixed very stable. They make some noise and 
shadowing (Disco-effect!). Needs also a charge-controller. The biggest enemy of the Wind Generator is the 
wind! Actually more cost efficient solution than Solar-Power.  
www.smart-powersystems.com 
Making your own Wind-Turbine, plans etc. http://www.i-love-windpower.com/ 
  
Adsorption chillers 
 
In contrast to absorption chillers, adsorption chillers require relatively low temperatures to generate cooling 
capacity. 65 - 85 °C are sufficient for the full capacity of these chillers (solar thermal). On the cold water 
side, flow temperatures down to 5 °C are feasible, with best results at 10 °C. This makes the adsorption 
refrigeration technology suitable for normal air conditioning systems, also with dehumidification function, 
and for technical processes in industry and commerce. 
They work extremely efficiently (300 watts input power)! This is a big topic worldwide, because very large 
energies are needed for cooling. Especially in southern countries there are many solar systems that produce 
far too much heat in summer. From it one can win cold. The whole thing is based on water. Maintenance: 
only every 3-5 years a part has to be replaced. There are also hybrid systems that can also be operated with 
electricity. The heat exchangers are large surfaces through which cold water flows.  
However, an adsorption chiller costs several times as much as a compression chiller with comparable cooling 
capacity.  
The adsorption refrigeration technology can bring great advantages if: 
Year-round demand for cooling capacity in the air-conditioning temperature range (e.g. computer centres, 
biogas plants, etc.) 
Free waste heat available as drive energy (CHP, production waste heat, district heating, excess solar system 
heat, etc.) 
 
Links: https://engineering.ucsb.edu/~yuen/references/rer-8.pdf 
https://www.scribd.com/presentation/75303226/Adsorption-Refrigeration 
https://www.amazon.com/Adsorption-Refrigeration-Technology-Theory-
Application/dp/1118197437?tag=duckduckgo-d-20  
https://fahrenheit.cool/en/ 
Book: Adsorption Refrigeration Technology: Theory and Application by Ruzhu Wang 
 
More advanced technologies for a sustainable future 
 
HHO-Systems 
 
They can reduce the energy-consumption realistic by 10-20 %.  
The power of HHO self-running free energy system running a 400 Watts load: 
https://www.youtube.com/watch?v=cMlciNOyo_U&feature=player_detailpage 
How an HHO generator works and helps you save gas: http://www.instructables.com/id/How-to-assemble-a-
HHO-Generator-and-why-it-works/  
 
Stirling Motor   
A Stirling engine is a heat engine that is operated by a cyclic compression and 
expansion of air or other gas at different temperatures.Originally conceived in 
1816 it was largely used as low-power domestic applications for over a century.   
 
Advantages 
 Stirling engines can run directly on any available heat source like solar, 
geothermal, biological, nuclear sources or waste heat from industry. 
 A continuous combustion process can be used to supply heat, so emissions can be reduced. 
 Some bearings and seals are on the cool side, so they require less lubricant and last longer. 
 The engine mechanisms are in some ways simpler than other engine types. Crude Stirling engines 
can be made using common household materials. 

 For a properly designed system the risk of explosion is low.

 In some cases, low operating pressure allows the use of lightweight cylinders.

 They can be built to run quietly and without an air supply (submarines etc).

 They start easily and run more efficiently in cold weather.

 A Stirling engine used for pumping cold water has high efficiency.

 They are extremely flexible. They can be used as combined heat and power in the winter and as

coolers in summer.

 Waste heat is easily harvested making Stirling engines useful for dual-output heat and power

systems.

 In 1986 Chevrolet Celebrity had a Stirling engine. Fuel economy was improved 45% and emissions

were greatly reduced. Acceleration (power response) was equivalent to the standard internal

combustion engine. A catalytic converter, muffler and frequent oil changes are not required. Why

they stopped it?

Disadvantages

 Size and cost issues

 Power and torque issues

 Stirling engines that run on small temperature differentials, are quite large

 Gas choice issues: The gas used should have a low heat capacity.

Links: https://de.wikipedia.org/wiki/Stirlingmotor

Running Stirling motor Philips www.youtube.com/watch?v=j7Ja05DKZsk

Self-made Stirling Engine: https://www.youtube.com/watch?v=j-4UY_-GOas

Stelzer-Motor An interesting concept based on a hydraulik-drive with 2 combustion-

chambers. The Stelzer engine is a two-stroke opposing-piston free-

piston engine design proposed by Frank Stelzer. It uses conjoined

pistons in a push-pull arrangement which allows for fewer moving

parts and simplified manufacturing.

http://www.stelzermotor.com/persisch_englisch.htm

https://en.wikipedia.org/wiki/Stelzer_engine

Liquid nitrogen engine

A liquid nitrogen vehicle is powered by liquid nitrogen, which is stored in a tank. Traditional nitrogen engine

designs work by heating the liquid nitrogen in a heat exchanger, extracting heat from the ambient air and

using the resulting pressurized gas to operate a piston or rotary motor. Vehicles propelled by liquid nitrogen

have been demonstrated, but are not used commercially. One such vehicle, Liquid Air was demonstrated in

1902.

https://en.wikipedia.org/wiki/Liquid_nitrogen_engine

www.youtube.com/watch?v=dhpEKRSweTw

http://www.keelynet.com/energy/boese.htm

LENR-Technology, E-Cat-Technologie

 Cold Fusion is the collective label for any apparatus that

enables non-toxic and radiation-free nuclear reactions to take place, based on low energy, whereby

elements fuse together forming new elements, producing excess heat and energy in the process.

With that technique heat can be produced for heating of houses.

 Andrea Rossi has fused nickel and hydrogen into copper to produce a self-sustaining exothermic

reaction over time in a device known as E-Cat.

30 
 With some cold fusion processes, Transmutation-processes (change of elements) can be 
implemented. This could be used for neutralize radioactive substances. (see book “Raumenergie-
Technik” of Josef Gruber, page 58)  
 Cold Fusion is a type of nuclear reaction that would occur at, or near, room temperature, versus 
today’s current deadly and highly polluting nuclear reactors that require millions of degrees of heat 
"Hot Fusion" to generate electricity, such as the Fukushima in Japan. 
 Andrea Rossi is the inventor of that system (see online).  
 Based on heating of a liquid and a heat-exchanger; “This amount of energy is far more than can be 
obtained from any known chemical sources in the small reactor volume.” 
 Airbus has filed a patent with the European Patent Office.  
 There is a demo of A. Rossi's E-Cat technology of the 1 kW QX reactor in Florida. 
  Plasma is 1.1 cm long and 0.3 cm in diameter. 
  Nominal power 22 KW 
  It has a COP (ratio of energy used to energy produced) of 57:1 (0.38KW / 29.2 KW). 
  Steam up to 550 °C is produced 
  Materials Lithium nitride, nickel powder. 
  It is ready for production! 
  Convert heat energy to electricity via Stirling engine or gas turbine (Japan).  
  Currently no licensing.  
  No neutron radiation, low gamma radiation 0.07 uSv/h 
  Not yet privately registered in Europe.  
  Industrially approved in the USA: Leonardo-Corp 
  other competitors: Brillouin Energy (https://brillouinenergy.com/)  
  Very little is reported about it in the press! 
 
Links:  
 https://www.youtube.com/user/NewEnergyFoundation 
 http://www.borderlands.de/net_pdf/NET0918S8-13.pdf  
 http://www.borderlands.de/net_pdf/NET0518S15-17.pdf 
http://e-catworld.com/ 
https://ecat.com/inventor-andrea-rossi 
https://en.wikipedia.org/wiki/Energy_Catalyzer 
http://andrea-rossi.com/ 
http://andrea-rossi.com/1mw-plant/ 
https://peswiki.com/directory:cold-fusion 
Andrea Rossi and Cold Fusion Game Changer: https://www.youtube.com/watch?v=qzZmPkBqaJ0 
www.haikolietz.de/docs/kaltefusion.pdf and Dr. Jan Marvan and Patterson-Transmutation-cell, 
www.earthtech.org.   
 
 Book: Fire from Ice: Searching for the Truth Behind the Cold Fusion Furor by Eugene Mallove 
 Cold Fusion, fire from water: free online film: https://www.youtube.com/watch?v=LicdsGRVW04  
 
Companies:  http://brillouinenergy.com/, https://brilliantlightpower.com  
A library of papers about cold fusion: http://lenr-canr.org/ 
Low-Energy Nuclear Reactions: www.newenergytimes.com/ 
 
Solar-Storage MDR-Technology 
https://www.youtube.com/watch?v=1BkZ7qJG3Ug 
 

31 
Keppemotor   
An excellent design for reduced power demand of small fans. 
http://www.keppemotor.com/institucional/?lang=en  
http://www.slimlife.eu/keppemotor.html;  
https://www.youtube.com/watch?v=-tzudcCsbzE (German and portugues) 
https://www.youtube.com/watch?v=lfcLxTssO0E (Portugues + English) 
http://www.borderlands.de/net_pdf/NET0314S18-20.pdf  (German) 
http://svrswiss.org/pdfs_aso/Eckhardt-190212.pdf  
https://www.youtube.com/user/KeppeMotor  
 
 
 
 
 
 
 
Solid State Solutions 
 
These solutions are purely electrical / electronic solutions. Energy can also be generated here!  
The self-recharging Battery supply of Carlos F.Benitez: It had been copied by John Bedini, Bruce Perreeault, 
Ronald Brandt etc.  
Ron Pugh’s Battery Charger: http://www.free-energy-info.com/SChapter19.pdf  
this is from the excellent book about free energy: online http://www.free-energy-info.com/ 
the complete book http://www.free-energy-info.com/PJKbook.pdf 
Power From Circuitry  http://www.free-energy-info.com/SChapter29.pdf 
A Self-Charging Battery Power Supply. http://emediapress.com/peterlindemann/benitez/ 
Pulse-Charging Battery Systems http://www.free-energy-info.co.uk/Chapter6.pdf 
charging battery http://www.r-charge.net/Free-Energy_ep_56.html 
 
Pendelum System of Veljko Milkovi 15.7.2019 
 
Explanation: https://www.youtube.com/watch?v=v8r63Ubpcf8 
VELJKO MILKOVIC Pendulum Lever System 
It gets energy out from a Pendulum Lever System. How does that work? 
Veljko Milkovic full video presentation https://www.youtube.com/watch?v=IuuNQcBgGyk 
Homepage https://www.veljkomilkovic.com/indexEng.htm 
all Videos: https://www.youtube.com/channel/UCbY9xP-hV6ZzDiDyHVmSpZw 
russ. Veljko Milkovic 2016 - Film “Sve je u energiji” 
An engine / generator combination that is supposed to deliver Overunity.  
Rotoverter Load Input Test: https://www.youtube.com/watch?v=xZDBtFLotbg 
Explanation https://www.instructables.com/id/RotoVerter/ 
Spanish: RV-ROTOVERTER CON BANCO DE CONDENSADORES 1ª PARTE 
https://www.youtube.com/watch?v=anZB19F-QN0 

STV-G Generators from Gigathor by Dr. Wolf Weber 29.6.2019

Works with vacuum and water. It is about air and vacuum flows. It needs an exact complex control. Vacuum

via vacuum pump or water. For 10 KW 2.7 m3 of water is necessary.

Systems with 5 KW or 15 KW or more are available.

The overunity-factor is 636 %. The function had been proved by “Bureau Veritas”. www.bureauveritas.de

https://gigathor-sa.beepworld.de/

http://www.borderlands.de/net_pdf/NET0113S28.pdf

https://www.slimlife.eu/gravitationvakuumgem.html

Many videos: https://www.youtube.com/channel/UC9b6C72nnjQpPdmBQp1RgRA

Anti-gravitation, Levitation 17.8.2019

The Russian researcher Yevgeny Podkletnov claims to have found out in an experiment with

superconductors in 1992 that the gravitational effect decreases over a very fast rotating superconductor.

Defence industry research projects GRASP (Gravity Research for Advanced Space Propulsion) and BAE

Systems' Project Greenglow#

More names: Townsend Brown; Dr. Paul LaViolette, Subquantum Kinetics#

http://www.gravitation.org/institute_of_gravity_research/institute_of_gravity_research.html

FELDA SHIELD - Why does a superconducting disk float on a permanent magnet, which theories deal with

field attenuations?

BIEFELD-BROWN-EFFECT / LIFTER - Fundamentals of buoyancy by high voltage and JLNaudin's

experimental setup on this subject

BALL CONDENSOR - Experiments with a ball capacitor and a HV source to eliminate gravity.

PODKLETNOV - SUPRALEITER - Gravitational shielding by superconductors

GREBENNIKOV - Antigravitation research and platform according to Grebennikov

BEE HONEY TEST - Re-enacting the experiment to shield gravity with honeycombs

DIE GLOCKE - German research on the shielding of gravity, as well as new ideas and approaches for own

research on this subject

Research work of Viktor Schauberger

If one turns water or air in high speed oscillation forms cycloid (spiral-shaped), it comes to an energy or

quality material construction, which levitates with tremendous power. It will take the engine who is doing

that with it! (implosion motors).

Implosion flying machine: It has penetrated the roof of the factory: It weighed 135 kilograms and was started

with only 0.05 hp.

One could extract at least 4,000 kilowatts of energy per second from the thermal energy in every cubic metre

of water, whereby the water temperature would decrease by one degree.

Incineration 9.8.2019 Incineration is a waste treatment process that involves the

combustion of waste materials. But it could be used to generate

energy as well e.g. with the Stirling-motor.

Incineration with energy recovery is one of several waste-to-energy

technologies such as gasification, pyrolysis and anaerobic

digestion. While incineration and gasification technologies are

similar in principle, the energy produced from incineration is high-

temperature heat whereas combustible gas is often the main energy

product from gasification.

Waste to Energy Incinerator (EfW). Waste to Energy is a renewable

energy solution. It can reduce the volume of waste to just 10% in

bottom ash for most scenarios.

https://en.wikipedia.org/wiki/Incineration

https://www.inciner8.com/

Home made incinerator

https://www.youtube.com/watch?v=qYhP0NP7iMs

Dual fluid reactor 29.6.2019 Although there are now good alternatives, this type of

nuclear reactor is still the better alternative.

The Dual Fluid Reactor (DFR) is a nuclear reactor

concept of the Institute for Solid State Nuclear Physics

(IFK) in Berlin. The IFK promotes it with outstanding

safety properties, extremely low costs and the ability to

destroy actinides such as plutonium or spent fuel rods

from light water reactors in short periods of time. The

remaining waste is only fission products that decay

within 300 years to a radiotoxicity below that of

natural uranium (see StandAG, Physical Background),

so that a geological repository is not necessary.

The neutron-physical functionality of the concept was

tested and validated by employees of the Technical

University of Munich and E.On Kernkraft.

The DFR should also be able to use thorium. Thus, the

Earth's nuclear fuel resources should be sufficient for

thousands of years.

Dual Fluid Reactor is inherently safe, CO2 free and

incinerates nuclear waste.

Turn nuclear waste into:

 Electricity production and seawater desalination using turbine waste heat.

 Plasma recycling for all kinds of waste.

 Gasoline synthesis from syngas.

 Petrochemistry (e.g. plastics).

 Production of hydrogen, ammonia and hydrazine (e.g. for fuel cell vehicles).

 Silane production (fuel for Ram-/Scramjets and Wankel engines).

 Production of medical isotopes (e.g. molybdenum 99/technetium 99m).

 Radiotomic chemistry (e.g. production of nitrous oxides, ozone, hydrocyanic acid, carbon

monoxide…)

 One further application plows the high seas daily: Large ships may use the DFR as a compact, clean

engine.

Links

Dr. Armin Huke: The Dual Fluid Reactor - the future "alternative" power generation?

https://www.youtube.com/watch?v=Cb15C9eey8s

Dual Fluid Reactor: This nuclear reactor is harmless and green - CO2 problem solved? ET in Focus

https://www.youtube.com/watch?v=gYedTbZYqIY

https://en.wikipedia.org/wiki/Dual_fluid_reactor

https://dual-fluid-reaktor.de/

Thorium-based nuclear power generation 7.8.2019

Thorium-based nuclear power generation offers several potential advantages over a uranium-based as much

greater abundance of thorium on Earth, superior physical and nuclear fuel properties, and reduced nuclear

waste production and the lack of easy weaponization potential.

https://en.wikipedia.org/wiki/Thorium-based_nuclear_power

The success story of the law for the expansion of renewable energies

The German law for the expansion of renewable energies (EEG) regulates the preferred feeding of electricity

from renewable sources into the grid and guarantees their producers fixed feed-in tariffs. In the interests of

climate and environmental protection, it should enable sustainable development of the energy supply, reduce

the economic costs of the energy supply, conserve fossil energy resources and promote the further

development of technologies for the generation of electricity from renewable sources.

Two basic principles are enshrined in law for achieving these goals:

- the grid operators' obligation to connect to and purchase electricity from renewable sources

- Feed-in tariffs in the form of moving market premiums, the amount of which depends on the current

electricity price.

- The electricity grid operator closest to an EEG installation is obliged to connect it and to give priority to the

electricity generated.

- The tariff rates are differentiated according to technologies and locations with terms of 20 years and are

intended to enable economic operation of the plants.

- The fixed rate decreases annually by a certain percentage, so that cost pressure is created as an incentive for

improvement for plants constructed later: Plants are to be manufactured more efficiently and cost-effectively

in order to be able to survive in the long term without aid on the market (for the level and development see

remuneration rates).

The generation of electricity from the following renewable energies will be promoted:

- Hydropower including wave, tidal, salt gradient and current energy

- wind power

- solar radiation energy (e.g. photovoltaics)

- geothermal energy

- Energy from biomass, including biogas, biomethane, landfill gas and sewage gas, and from the

biodegradable fraction of household and industrial waste.

- In addition, electricity generation is promoted from mine gas, which is a fossil energy source.

Electricity production from renewable energy sources varies regionally and seasonally, so that a

compensation scheme is necessary. ]

The possibilities for direct marketing of EEG electricity have been expanded with the market premium

model.

A certain amount is paid by the final consumers.

The EEG provides for exemptions for companies with high electricity consumption and for railways in order

to maintain their international competitiveness.

Since the introduction of the EEG in 2000, the amount of electricity remunerated under the EEG has

increased tenfold (by 2012). The largest share (46 %) comes from wind power (onshore), followed by

biomass (31 %) and photovoltaics (approx. 15 %).

https://en.wikipedia.org/wiki/German_Renewable_Energy_Sources_Act

Marketing and success

In general, the relationship between investor and inventor is very difficult and often not successful. Investors

want to see finished prototypes. But then the work is done! Successful companies (Vita-chip etc.) have no

outside capital! Maybe it can be done in small steps without dependencies?

However, good marketing is absolutely necessary. This is even more important than the product itself.

Companies often come and are very interested. But often you don't even get the prototype back.

You can also find something at youtube.